ENERGY RELEASE - IMPROVED FORMULA!
The Energy Release Chemists have been busy...they enhanced the antifriction properties of Energy Release by 40%. The Improved Formula offers improved anti-wear & extreme presure performance. The advanced formula is compatible with all engine oil grades, including low viscosity 0W-20 oils. The improved formula has superior thermal stability and resists thickening at low temperatures and prevents breakdown and shearing, which degrades lubricity. The Improved Energy Release Formula has advanced anti-corrosive and anti-oxidation properties to prevent the buildup of sludge. The Energy Release Advanced Formula is slightly more transparent in appearance and less viscous.
Note: Energy Release Antifriction Engine Treatment IS NOT an oil treatment. ER is carried by oil to points of friciton, heat generation and wear. ER is activated by heat & friction and treats those areas directly.
ER Antifriction Metal Conditioner 5fl.oz (P001) - $9.99
ER Antifriction Metal Conditioner 16fl.oz (P002) - $24.99
ER Antifriction Metal Conditioner 1 US gal (P003) Free Shipping - $145.34
ER Antifriction Metal Conditioner 1 US gal - 4-PAK (P003-4) Free Shipping - $552.36
ER Antifriction Metal Conditioner 5 US gal - (P003-5) Free Shipping - $676.50
ER Antifriction Metal Conditioner 55 US gal Drum (P003-55) Free Shipping
* Please Call for Latest Price and Shipping
What is Energy Release Antifriction Metal Conditioner?
Energy Release, commonly known as ER, is a liquid chemical formula to be added to your existing oil to improve and protect moving metal parts. ER treats metal surfaces in a time-temperature-pressure relationship. The higher the temperature or pressure, the shorter the time it takes to condition metal parts. ER is not an oil or lubricant. ER is carried by lubricants – oil, water, hydraulic fluid, compressors – to points of friction. ER is a pure undiluted complex chemical formula that contains organic and synthetic compounds. ER mixes readily with petroleum and synthetic lubricants such as oils, greases, ATF/hydraulic fluids and can even be used in air conditioning systems.
ER treats the metal itself rather than the oil. ER bonds to the Ferrous reaction sites that are available in the surface asperities of wear metals. By bonding to the microscopic pits, ER significantly smoothes and at the same time strengthens the surface of Ferrous metals. ER seals rough pores, inhibits galling and smoothes the roughness of the metal surface without changing any tolerances. This process dramatically reduces the coefficient of friction and wear between moving metal parts. Less friction means less heat is generated. The result is less wear.
Energy Release Racing Products.
More World Champion Racers Use ER Than Any Other Additive. Energy Release Products Perform, Protect and Extend the Life of Your Vechicle.
- ER has been Tested and Proven Since 1985
- ER is Heat-Activated
- ER is 100% Pure Concentrate
- ER Does Not Contain PTFE, moly, graphite, lead, zinc, metals or petroleum
- ER IS NOT Diluted With Oil. ER IS NOT an oil treatment. The oil is a carrier for ER in the engine to points of friction, heat generation and wear.
- ER Mixes Readily with Petroleum and Synthetic Lubricants
- ER dramatically Reduces the Coefficient of Friction and Wear Between Moving Metal Parts
- ER is Nonflammable, Non-toxic, and Biodegradable
- ER Can be Used in Every Lubricated System of Your Vehicle
Summary: ER is activated by heat & friction and treats those areas directly. ER treats metal surfaces in a time-temperature-pressure relationship. When Energy Release is carried by lubricants to heat and pressure points, wherever there is friction, the polishing effect caused by ER modifying the surface of the metal, releases the machinery to work smoother, freer and cooler, thus, reducing energy consumption and extending the life of the components.
What are some of the Benefits of Using Energy Release?
When friction and wear are reduced in any vehicle or equipment that has moving parts, any of the following may occur:
- Increased Performance
- Improved Combustion Efficiency
- Increased Fuel Economy
- Reduced Operating Temperatures
- Quieter Operation
- Reduced Oil Consumption
- Extended Oil Life
- Easier Cold Starts
- Prolonged Vehicle Life
Energy Release Applications
- Engine Crankcase
- Manual Transmission
- Automatic Transmission
- Differentials/Transfer Case
- Power Steering
- Wheel Bearing
- C.V. Joints
- Heavy Truck Wheel Bearing Hubs
- 2 Cycle Fuel
- Air Conditioning Units
- Cutting & Tapping – cutters, drills, taps, reamers and punches
Energy Release Questions and Answers
Q. What makes ER different than other additives?
A. ER is the only “Pure Concentrate” available. ER can be used in all lubricated systems of your vehicle and is non-toxic, nonflammable and environmentally safe. ER does not contain fortifiers commonly found in other additives such as Teflon, zinc, moly, lead, or graphite. ER Antifriction Metal Conditioner IS NOT an oil Treatment. ER is carried to points of friction, heat generation and wear. ER is activated by heat & friction, treating those areas directly.
Q. Does ER increase horsepower?
A. Yes. We don't promote horsepower gains, however, it is an added benefit when using ER in your engine. We promote PROTECTION, PERFORMANCE, PROVEN. A recent Dyno Test performed by Brickshop Dyno (Chuck Cielinski) of Gilman, MN on April 18, 2013 on a Chevy 454 race engine showed a 1% gain after adding ER. More World Champions Use ER Than Any Other Addtive. Please contact Noel at 701-746-9687 for more information about conducting a dyno test using Energy Release. Racer Discounts Available...please call.
Q. Can ER be used with wet clutches?
A. Yes. ER does not coat or plate surfaces and does not negatively affect fiber clutch disc, therefore it can be used in wet clutch applications commonly found in motorcycles, ATV’s and even automatic transmissions.
Q. If I use good oil will I still see the benefit us using ER?
A. Yes. ER is designed to modify the rough surface of ferrous (iron) metals thus making them smoother. ER is not a lubricant like oil, but is designed to be carried by oil to points of heat and friction.
Q. Can I use ER in my brand new engine?
A. Yes. However, we recommend that you break-in your new engine as suggested by the manufacturer, then add ER to your oil.
Q. Can I use ER in my old engine?
A. Yes. ER is known for its ability to give new life to many old engines.
Q. How long will it take for me to see results with ER?
A. Many users report results within the first one to two tanks of gas. However, remember that ER is a heat-activated chemical which needs time to work, and that each vehicle is different. Give ER time to work and you will see the benefits.
Q. Other additives are claiming to be “metal conditioners” too, so how can I tell for sure?
A. Either the Pin k& Block Test or the STM-2782 Timken Bearing Test will give conclusive evidence of ER’s ability to truly condition metal, especially when you wipe the metal surface dry and run bare steel to steel with no lubrications. Nothing beats Energy Release.
Q. How does using ER affect my warranty?
A. Manufacturers don’t usually specify the brand of oil you must use or state that you cannot use an additive. They do however have specific requirements for regular service intervals and keeping within certain viscosity and oil type guidelines. Mixing ER with oil at Energy Release’s recommended ratios does not change the viscosity rating of the oil. Therefore, it does not create a problem with most warranty plans, as long as the owner has maintained the vehicle per the manufacturer’s program.
Q. Are there other applications for ER?
A. Yes, keep in mind that ER is not a lubricant, but works with lubricants such as oils, greases, hydraulic fluids, gear lubes, machining and cutting fluids and even Freon. Energy Release Gear & Chain Clear Grease works great as a bicycle chain grease. ER Chain Grease combines a high quality soluble grease with ER to form a protective barrier against moisture, dirt and extreme temperature swings. It sporays on thin to penetrated the link pins and tacks up in seconds for sperior adherenace. ER bicycle chain grease helps to reduce overall wear and prevents rust and corrosion from forming on exposed durfaces. ER Chain Grease is very efective in treating bicycle derailleur gears.