More World Champions Use ER Than Any Other Additive. Period!
Engine • Transmission • Differential • 2-Cycle and More...
Energy Release Antifriction Metal Conditioner is used by some of the greatest racers and most distinguished teams in the world. They rely on Energy Release Antifriction Metal Conditioner products to help reduce friction and increase performance in their vehicles. Applied High Performance Products is proud to offer these teams a true competitive advantage over their opponents. Energy Release products are used by all of our sponsored racers and all endorsements are a result of genuine satisfaction or ER’s performance.
Energy Release Antifriction Metal Conditioner IS NOT an oil treatment. Energy Release is Carried by Oil to points of friction, heat generation and wear, treating those areas directly. Energy Release is the Only Oil Additive that can be used in every lubricated system of your vehicle (not brake fluid). Adding Energy Release to engines and all lubricated systems helps eliminate oil related failures caused by lubrication break down. Applied High Performance Products recommends using Energy Release Antifriction Metal Conditioner to anyone who is serious about cutting engine repair costs and extending the life of their vehicle components.
Energy Release P003 – 1 Gallon | $135.00 per Gallon | Cost per Quart of Oil - $1.05
Vehicle & Engines
ER Ratio Per Quart
Cost Per Oz.
Cost Per Quart
Number of Quarts
Cost Per Oil Change
Oil Changes Per Gallon
Sprint Car Engine - 410
1 Ounce ER Per Quart
Late Model Engine - 360
1 Ounce ER Per Quart
B Modified Engine
1 Ounce ER Per Quart
Briggs Animal Engine
1 Ounce ER Per Quart
Winters Rear End
2 Ounce ER Per Quart
Semi Truck Engine
4 Ounce ER Per Gallon
$4.20 per Gallon
1 Ounce ER Per Quart
Engine Oil Directions: Break-in new engine as suggested by engine builder, then add ER to your oil.
- Add 2 ounces Energy Release per quart of oil initially.
- Then, add 1 ounce Energy Release per quart of oil on subsequent oil changes
Applied High Performance Products delivers orders for P003 (1 U.S. Gallon) within a 50 mile radius of Grand Forks, ND.
Direct order number: 218-791-4267
What is Energy Release Antifriction Metal Conditioner?
Energy Release, commonly known as ER, is a liquid chemical formula to be added to your existing oil to improve and protect moving metal parts. ER treats metal surfaces in a time-temperature-pressure relationship. The higher the temperature or pressure, the shorter the time it takes to condition metal parts. ER is not an oil or lubricant. ER is carried by lubricants – oil, water, hydraulic fluid, compressors – to points of friction. ER is a pure undiluted complex chemical formula that contains organic and synthetic compounds. ER mixes readily with petroleum and synthetic lubricants such as oils, greases, ATF/hydraulic fluids and can even be used in air conditioning systems.
ER treats the metal itself rather than the oil. ER bonds to the Ferrous reaction sites that are available in the surface asperities of wear metals. By bonding to the microscopic pits, ER significantly smoothes and at the same time strengthens the surface of Ferrous metals. ER seals rough pores, inhibits galling and smoothes the roughness of the metal surface without changing any tolerances. This process dramatically reduces the coefficient of friction and wear between moving metal parts. Less friction means less heat is generated. The result is less wear.
Energy Release Racing Products.
More World Champion Racers Use ER Than Any Other Additive. Energy Release Products Perform, Protect and Extend the Life of Your Vechicle.
- ER has been Tested and Proven Since 1985
- ER is Heat-Activated
- ER is 100% Pure Concentrate
- ER Does Not Contain PTFE, moly, graphite, lead, zinc, metals or petroleum
- ER IS NOT Diluted With Oil. ER IS NOT an oil treatment. The oil is a carrier for ER in the engine to points of friction, heat generation and wear.
- ER Mixes Readily with Petroleum and Synthetic Lubricants
- ER dramatically Reduces the Coefficient of Friction and Wear Between Moving Metal Parts
- ER is Nonflammable, Non-toxic, and Biodegradable
- ER Can be Used in Every Lubricated System of Your Vehicle
Summary: Energy Release Antifriction Metal Conditioner is activated by heat & friction and treats those areas directly. Energy Release treats metal surfaces in a time-temperature-pressure relationship. When Energy Release Antifriction Metal Conditioner is carried by lubricants to heat and pressure points, wherever there is friction, the polishing effect caused by ER modifying the surface of the metal, releases the machinery to work smoother, freer and cooler, thus, reducing energy consumption and extending the life of the components.
What are some of the Benefits of Using Energy Release?
When friction and wear are reduced in any vehicle or equipment that has moving parts, any of the following may occur:
- Increased Performance
- Improved Combustion Efficiency
- Increased Fuel Economy
- Reduced Operating Temperatures
- Quieter Operation
- Reduced Oil Consumption
- Extended Oil Life
- Easier Cold Starts
- Prolonged Vehicle Life
Energy Release Applications
- Engine Crankcase
- Manual Transmission
- Automatic Transmission
- Differentials/Transfer Case
- Power Steering
- Wheel Bearing
- C.V. Joints
- Heavy Truck Wheel Bearing Hubs
- 2 Cycle Fuel
- Air Conditioning Units
- Cutting & Tapping – cutters, drills, taps, reamers and punches
Energy Release Questions and Answers
A. ER is the only “Pure Concentrate” available. ER can be used in all lubricated systems of your vehicle and is non-toxic, nonflammable and environmentally safe. ER does not contain fortifiers commonly found in other additives such as Teflon, zinc, moly, lead, or graphite. ER Antifriction Metal Conditioner IS NOT an oil Treatment. ER is carried to points of friction, heat generation and wear. ER is activated by heat & friction, treating those areas directly.
A. Yes. We don't promote horsepower gains, however, it is an added benefit when using ER in your engine. We promote PROTECTION, PERFORMANCE, PROVEN. A recent Dyno Test performed by Brickshop Dyno (Chuck Cielinski) of Gilman, MN on April 18, 2013 on a Chevy 454 race engine showed a 1% gain after adding ER. More World Champions Use ER Than Any Other Addtive. Please contact Noel at 701-746-9687 for more information about conducting a dyno test using Energy Release. Racer Discounts Available...please call.
A. Yes. ER does not coat or plate surfaces and does not negatively affect fiber clutch disc, therefore it can be used in wet clutch applications commonly found in motorcycles, ATV’s and even automatic transmissions.
A. Yes. ER is designed to modify the rough surface of ferrous (iron) metals thus making them smoother. ER is not a lubricant like oil, but is designed to be carried by oil to points of heat and friction.
A. Yes. However, we recommend that you break-in your new engine as suggested by the manufacturer, then add ER to your oil.
A. Yes. ER is known for its ability to give new life to many old engines.
A. Many users report results within the first one to two tanks of gas. However, remember that ER is a heat-activated chemical which needs time to work, and that each vehicle is different. Give ER time to work and you will see the benefits.
A. Either the Pin k& Block Test or the STM-2782 Timken Bearing Test will give conclusive evidence of ER’s ability to truly condition metal, especially when you wipe the metal surface dry and run bare steel to steel with no lubrications. Nothing beats Energy Release.
A. Manufacturers don’t usually specify the brand of oil you must use or state that you cannot use an additive. They do however have specific requirements for regular service intervals and keeping within certain viscosity and oil type guidelines. Mixing ER with oil at Energy Release’s recommended ratios does not change the viscosity rating of the oil. Therefore, it does not create a problem with most warranty plans, as long as the owner has maintained the vehicle per the manufacturer’s program.
A. Yes, keep in mind that ER is not a lubricant, but works with lubricants such as oils, greases, hydraulic fluids, gear lubes, machining and cutting fluids and even Freon. Chain Grease Energy Release Gear & Chain Clear Grease works great as a bicycle chain grease. ER Chain Grease combines a high quality soluble grease with ER to form a protective barrier against moisture, dirt and extreme temperature swings. It sprays on thin to penetrated the link pins and tacks up in seconds for sperior adherenace. ER bicycle chain grease helps to reduce overall wear and prevents rust and corrosion from forming on exposed durfaces. ER Chain Grease is very efective in treating bicycle derailleur gears.